Festo MPA-FB Series, Manual

Page: 49 / 168

3. Installation
3−3
Festo P.BE−MPA−EN en 0502b
Contents of this chapter This chapter describes the tubing and cabling of the MPA
valve terminal. The following in particular belong here:
General instructions on preparing the compressed air and
on connecting the tubing
Instructions on pilot control of the valve solenoid coils
with internal or external auxiliary pilot air.
Instructions on operating the MPA valve terminal with
pressure zone separation
Fitting the QS screw connectors
Connecting the power supply
Earthing the MPA valve terminal
Address assignment of the valves
Further information Instructions on connecting the electric components of the
MPA valve terminal with MP or MPM connection can be found
in the leaflet supplied with the product.
Instructions on connecting the operating voltage can be
found in chapter 3 of the CPX system manual.
Detailed indtructions on connecting the CPX modules (field
bus node, I/O modules etc.) can be found in the relevant
manuals for the CPX module.
Detailed instructions on addressing the pneumatic modules
of the MPA valve terminal with CPX terminal can be found in
the "Manual for the CPX I/O modules."