Festo MPA-FB Series, Manual

Page: 76 / 168

3. Installation
3−30
Festo P.BE−MPA−EN en 0502b
Example of address assignment
Caution
Note that addresses may be shifted if the valve terminal is
extended at a later stage.
In the following example an MPA valve terminal type MPA−
MPM−PI with the folllowing components is addressed:
Components MPA 1 MPA 2
Sub−bases 2 (8 valve locations) 2 (4 valve locations)
Electronic
module 1 V MPA1 −MPM−EMM− 8
1 V MPA1 −MPM−EMM− 4
1 V MPA2 −MPM−EMM− 4
1 V MPA2 −MPM−EMM− 2
For controlling the valves, each valve solenoid coil (referred to
in the following as coil) is assigned to a certain pin of the
multipin plug.