Festo MPA-FB Series, Manual

Page: 118 / 168

5. Diagnosis and error treatment
5−22
Festo P.BE−MPA−EN en 0502b
1
Locking clip
1
Fig.5/8: Unlocking the manifold board
Fitting Proceed as follows:
1. Push the manifold board to be fitted into the sub−base
from the right until it clips into position.
Fig.5/9: Fitting the manifold board
2. If the last fitted manifold board is the last one in front of
the fright−hand MPA end plate, you must insert the end
piece type MPA into this manifold board.