Festo MPA-FB Series, Manual

Page: 36 / 168

2. Fitting
2−6
Festo P.BE−MPA−EN en 0502b
2.2.1 Hat rail fitting/removal
Caution
When fitting onto a hat rail, observe the details on vibra
tion and shock in the technical specifications in Appen
dix A.
A hat−rail fitting without a hat−rail clamping unit is not
permitted.
·
If the terminal is fitted in a sloping position or if it is sub
jected to vibration, secure the hat−rail clamping unit
additionally
against sliding down with the locking screws
(see Fig.2/1, item 2)
against unintentional loosening/opening
In order to fit the valve terminal onto a hat rail you will require
the following mounting kits:
for MPA valve terminal with MP connection: CPA−BG−NRH
This kit consists of 2 M4x10 screws and 2 clamping el
ements.
for MPA valve terminals with CPX terminal: CPX−CPA−BG−
NRH. This kit consists of 3 M4x10 screws and 3 clamping
elements.