Festo MPA-FB Series, Manual

Page: 33 / 168

2. Fitting
2−3
Festo P.BE−MPA−EN en 0502b
Contents of this chapter The MPA valve terminal is already assembled when supplied
from the factory. Accessories such as inscription labels and
manual override caps (optional) must be fitted on site.
This chapter describes how to fit and remove:
the complete MPA valve terminal
the inscription labels
the manual override caps
Further information Special information on replacing or adding pneumatic compo
nents can be found in chapter 5.
MPA valve terminal with CPX terminal:
Information on fitting the MPA valve terminal with CPX
terminal can be found in the CPX system manual.
Information on fitting and dismantling the I/O modules
can be found in the manual CPX I/O modules.
Information on fitting modules and components ordered
at a later stage can be found in the leaflet supplied with
the product.