Festo MPA-FB Series, Manual

Page: 119 / 168

5. Diagnosis and error treatment
5−23
Festo P.BE−MPA−EN en 0502b
1
End piece
Type MPA
1
Fig.5/10: Fitting the end piece into the last manifold board
3. Fit the sub−base to the neighbouring components (see
section 5.3.5).
4. Remove the electronic module from the sub−base (see
section 5.3.4).
5. Fit all the valve plates and blanking plates again onto the
sub−base (see section 5.3.3).