6-19
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Global Presets page
You can save and recall global presets from the Global presets page (figure 6-20).
Access the Global presets page by clicking the Global Presets link on the left of the
Control page.
Select RGB & Audio Settings.
Refresh.
Select Set & View Ties.
Figure 6-20
—
Global Presets page
Save a preset
Save the current configuration (configuration 0) as a preset as follows:
1
.
Click the Save Preset button.
2
.
Select the desired preset by clicking on one of the presets listed. To create a
new preset, click one of the [unassigned] buttons. Overwrite an existing preset
by clicking an already existing preset.
3
.
If desired, type over the current name in the box adjacent to the Save Preset
button.
Preset names are limited to 12 upper and lower case alphanumeric characters
and the {space} _ : = and / characters.
The following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } <
> ’ “ ; : | \ and ?.
If you do not rename an unassigned button, the CrossPoint 450 Plus or
MAV Plus switcher automatically names the preset as Preset {next available
number}.
If you do not rename an existing preset when it is overwritten, the
CrossPoint 450 Plus or MAV Plus switcher retains the same name.
4
.
Click the Accept button.
Recall a preset
To recall a global preset to be the current configuration, click the button associated
with the desired preset.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
