Programmer’s Guide, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Programmer’s Guide
4-6
Command/Response Table for SIS Commands
Symbol Definitions:
= Carriage return/line feed
= Carriage return (no line feed)
•
= Space
Esc
= Escape key
Input and output numbers in commands may be entered as either 1-digit, 2-digit, or 3-digit
numbers. All input and output numbers are reported as 2-digit numbers in the response.
X1
= Input number
01 – (maximum number of inputs for your model)
X2
= Input number (for tie)
00 – (maximum number of inputs) (00 = untied)
X3
= Output number
01 – (maximum number of outputs for your model)
X4
= Numeric dB value
–18 to +24 (45 steps of gain or attenuation)
X5
= Audio gain
0 – 24 (1 dB/step)
X6
= Audio attenuation
1 – 18 (1 dB/step)
X7
= Volume adjustment range
0 – 64 (1 dB/step except for 0-to-1, which is 34 dB)
X8
= Room # (for room presets)
10 max. (each can have up to 10 presets (
X12
s) assigned)
A Room is a subset of operator-selected outputs that relate to each other. The
CrossPoint 450 Plus or MAV Plus switcher supports up to 10 rooms, each of which can consist
of from 1 to 16 outputs.
X9
= Mute, executive mode, power supply
(0 = off/not OK, 1 = on/OK)
X10
= Group # (for I/O grouping)
1 through 4 groups (0 = no group)
X11
= Global preset #
32 maximum (0 = current configuration)
X12
= Room preset #
10 maximum (0 = current configuration for room)
A Room preset is a stored configuration with all of the outputs assigned to a single room.
When a room preset is retrieved from memory, it becomes the current configuration.
X13
= RGB delay interval
Delay in ½ second increments (10 maximum)
X14
= Video/audio mute:
0 = no mutes
1 = video mute
2 = audio mute
3 = video and audio mute
X15
= Sync frequency
xxx.xx (frequency in Hz (V) or kHz (H))
X19
= Firmware version number to second decimal place (x.xx)
X20
= Verbose firmware version-description-upload date/time. See page 4-15.
X23
= Name
12 characters maximum for global and room preset names.
11 characters maximum for room names.
Upper- and lower-case alphanumeric characters and
_ : = / and spaces are valid.
The following characters are invalid in the name: {space} ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
X24
= Voltage
Positive or negative voltage and magnitude
X25
= Temperature
Degrees Fahrenheit
X26
= Fan speed
RPM
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
