Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-26
2
.
Press and hold the RGBHV button for approximately 2 seconds (figure 3-37).
RGBHV
RGBHV
Press and hold the RGBHV button until it blinks.
2 seconds
= Blinking button
Figure 3-37 — Select
RGB Delay
mode
3
.
Press and release the output 17 button (figure 3-38).
17 18 19 20 21 22 23
8
9 10
24 25 26
1
2
17 18
17 18
1
2
O
U
T
P
U
T
S
1
2
3
4
5
6
7
I
N
P
U
T
S
Press and release the
Output
17 button.
The button lights green.
The Input 1 through Input 10 buttons display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the
green
input buttons display 3.5 seconds of RGB delay.
3.5
3.0
2.5
2.0
1.5
1.0
0.5
= Unlit button
= Lit button
Figure 3-38 — Select an output
4
.
Press and release the Esc (
) button once (figure 3-39) to increase the RGB
delay by a half second.
Press and release the Esc (
) button twice more to increase the RGB delay by
a whole second. Note the input button indication changes that occur each
time the Esc (
) button is pressed and released.
Figure 3-39 show the result of pressing the Esc (
) button a total of 3 times.
ESC
ESC
ESC
17 18 19 20 21 22 23 24 25 26
1
2
3
4
5
6
7
I
N
P
U
T
S
8
9 10
3.5
4.0
4.5
5.0
3.0
2.5
2.0
1.5
1.0
0.5
1
Press the Esc button to increase the RGB interval that is applied to switches to
the selected output by a half second per button push.
= Unlit button
= Lit button
The Input 1 through Input 10 buttons display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the
green
input buttons display 5.0 seconds of RGB interval.
Figure 3-39 — Adjust the RGB delay interval
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
