Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-30
Example 8: Recalling a preset
The following steps show an example in which a preset is recalled to become the
current configuration. The steps show the front panel indications that result from
your action.
1
.
Press and release the Esc button (figure 3-46).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-46 — Clear all selections
2
.
Press and release the Preset button (figure 3-47).
PRESET
1
2
17 18
17 18
1
2
I
N
P
U
T
S
Press and release the Preset button.
The Preset button lights.
All input buttons with
assigned presets light red.
Red
(Preset Assigned)
Unlit
(No Preset Assigned)
Figure 3-47 — Enter
Recall Preset
mode
3
.
Press and release the input or output button for the desired preset
(figure 3-48).
C O N T R O L
PRESET
ENTER
ESC
VIEW
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
I
N
P
U
T
S
Press and release the Input 1 button.
The button blinks
red
to indicate that this
preset
number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
= Blinking button
Figure 3-48 — Select the preset
Figure 3-41 shows the presets associated with the various input and output
buttons for all three front panel configurations.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
