Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-18
Example 4: Viewing video and audio, audio only, and video only ties
The following steps show an example of viewing the video and audio, audio-only,
and video-only ties in the current configuration. The steps show the front panel
indications that result from your action.
This example assumes that you have performed example 1, example 2, and
example 3.
1
.
Press and release the Esc button (figure 3-23).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-23 — Clear all selections
2
.
Press and release the View button to enter View-Only mode. The View button
lights red.
3
.
To select both video and audio for viewing, if necessary, press and release the
RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus switchers)
button and the Audio button (figure 3-24).
I / O
VIDEO
AUDIO
O
U
T
P
U
T
S
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
Until you select an input, the buttons for all untied outputs light
amber
if
no inputs
are tied,
green
if
no video inputs
are tied
(only audio is tied), or
red
if
no audio inputs
are tied (only
video is tied).
Until you select an input, the buttons for all untied outputs light
amber
if
no inputs
are tied,
green
if
no video inputs
are tied
(only audio is tied), or
red
if
no audio inputs
are tied (only
video is tied).
Press the Audio button
to toggle on and off.
The button lights
red
when selected.
Press the RGBHV/ Video
button to toggle on and off.
The button lights
green
when selected.
Figure 3-24 — Select RGBHV or video and audio
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
