Operation, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-10
Creating a configuration
The current configuration can be changed using the front panel buttons. Change
the current configuration as follows:
1
.
Press the Esc button to clear any input button indicators, output button
indicators, or control button indicators that may be lit.
2
.
Select to configure video, audio, or both by pressing the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus switchers) button and/or
Audio button.
3
.
Select the desired input and output(s) by pressing the input and output
buttons.
Input buttons light green. Output buttons light or blink amber to indicate
video and audio ties, green to indicate video only ties, and red to indicate
audio only ties.
To indicate potential ties, output buttons blink the appropriate color when an
input is selected.
To indicate current ties, output buttons light steadily the appropriate color
when an input is selected.
To clear unwanted outputs, press and release the associated lit output
buttons. To indicate potential unties, output buttons blink the appropriate
color when an output is deselected but not untied from the input.
4
.
Press and release the Enter button to accept the tie.
5
.
Repeat steps 1 through 4 to create additional ties until the desired
configuration is complete.
•
Only one video input and one audio input can be tied to an output.
•
If a tie is made between an input and an output, and the selected output
was previously tied to another input, the older tie is broken in favor of the
newer tie.
•
If an input with no tie is selected, only that input’s button lights.
•
When the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus
switchers) button and Audio button are lit, if an input with an audio tie
but no video tie is selected, the input’s button lights green and the output
button lights the appropriate color (amber, green, or red).
•
As each input and output is selected, the associated output button blinks
the appropriate color to indicate a tentative tie. Buttons for output(s) that
were already tied to the input light the appropriate color steadily.
Outputs that are already tied can be left on, along with new blinking
selections, or toggled off by pressing the associated output button.
•
If you press the input button for an I/O grouped input and then try to
select an output in a different group, the associated output button cannot
be selected. The associated input button remains lit.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
