3-11
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Example 1: Creating a set of video and audio ties
The following steps show an example in which input 5 is tied to outputs 3, 4, and 8.
The steps show the front panel indications that result from your action.
This example assumes that there are no ties in the current configuration.
1
.
Press and release the Esc button (figure 3-5).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-5 — Clear all selections
2
.
To select video and audio for the tie, if necessary, press and release the
RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus switchers)
button and the Audio button until the buttons light (figure 3-6).
I / O
RGBHV
AUDIO
Press the RGBHV/Video button to toggle on and off.
The button lights
green
when selected.
Press the Audio button to toggle on and off.
The button lights
red
when selected.
Figure 3-6 — Select RGBHV or video and audio
3
.
Press and release the input 5 button (figure 3-7).
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
I
N
P
U
T
S
Press and release the Input 5 button.
The button lights
green
.
Figure 3-7 — Select an input
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
