3-31
CrossPoint 450 Plus and MAV Plus Switchers • Operation
4
.
Press and release the Enter button (figure 3-49). The configuration stored in
selected memory location is now the current configuration and can be viewed
in the View-Only mode (see example 4).
C O N T R O L
PRESET
ENTER
ESC
VIEW
1
2
17 18
17 18
1
2
I
N
P
U
T
S
All input buttons return to unlit or background illumination.
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
Figure 3-49 — Press the Enter button
Muting and unmuting video and/or audio outputs
Individual outputs can be muted or unmuted as follows:
1
.
Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
2
.
Press and release the View button.
3
.
Select video, audio, or both to mute or unmute by pressing the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus switchers) button and/or
the Audio button.
4
.
One at a time, press and hold the output button(s) for the desired output(s)
for approximately 2 seconds. The output LED(s) for the selected output(s)
blink to indicate the mute or return to their previous state to indicate the
unmute.
5
.
Press and release the View button to return to normal switcher operation.
•
You can mute video and audio, video-only, or audio-only outputs.
Pressing and releasing the RGBHV (CrossPoint 450 Plus switchers) or
Video (MAV Plus switchers) button and the Audio button toggles each
selection on and off.
•
When you enter View-Only mode, the output LEDs turn on for all
outputs without ties.
•
On CrossPoint 450 Plus switchers, the video mute function mutes the
R, G, and B planes only; the H and V planes are still active. On
MAV Plus switchers, the video mute function mutes all video planes.
•
Mutes are saved to non-volatile memory. When power is removed and
restored, the mute settings are retained.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
