Matrix Software, cont’d
CrossPoint 450 Plus and MAV Plus Switchers
•
Matrix Software
5-12
The radio buttons and check boxes associated with each address field permit the
administrator to specify specific e-mail requirements for each recipient.
Edit these fields and controls as follows:
1
.
Click in the desired E-mail Addressee field. The graphic cursor becomes a
text cursor.
2
.
Edit the e-mail address as desired. Standard e-mail address conventions
(for example: nnnnn@xxx.com) apply.
3
.
Press the Tab key on the keyboard or click in another field to exit the e-mail
addressee field.
4
.
In the square check boxes associated with each addressee, select the options
about which the addressee is to be e-mailed: missing input(s), fans, and/or
power supply. In the floating box that contains the input numbers, select the
inputs that need monitoring.
5
.
In the round radio buttons associated with each addressee, select whether the
addressee is to be e-mailed of failures, fixes, both, or not be notified.
The None radio button is useful for temporarily removing personnel from the
e-mail list when they are unavailable, such as on travel or vacation.
6
.
If desired, click on the Send test E-mail button to test the e-mail function.
7
.
Click on the Take button to make the e-mail address changes take affect.
Update firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip.
Update the switcher firmware as follows:
The update firmware utility is for replacing the firmware that controls all
switcher operation. This is not the page to insert your own HTML pages.
See Upload HTML files to insert custom HTML pages.
1
.
Visit the Extron web site, www.extron.com, select the CrossPoint/MAV Plus
product category, and select the latest firmware file for download. Note the
folder to which you save the firmware file.
2
.
Start the Matrix S Control Program and connect to the
CrossPoint 450 Plus or MAV Plus switcher. See Using the software in this
chapter, steps 1 through 4, starting on page 5-3.
The Ethernet connection is much faster than the RS-232/RS-422 connection.
Extron recommends using the Ethernet connection rather than the serial port
for firmware uploads.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
