3-33
CrossPoint 450 Plus and MAV Plus Switchers • Operation
4
.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(figure 3-52) for approximately 2 seconds until the buttons begin to blink. The
output 3 and output 4 video and audio signals are muted.
3
4
3
4
Press and
hold
the Output 3 button.
The button blinks
amber
to indicate that
the
RGBHV
and
audio
outputs are muted.
Press and
hold
the Output 4 button.
The button blinks
amber
to indicate that
the
RGBHV
and
audio
outputs are muted.
Mute outputs one at a time.
= Blinking button
2 seconds
2 seconds
Figure 3-52 — Mute the outputs
If both RGBHV/video and audio are selected, the mute action toggles both the
video and audio outputs. If either the video output or the audio output is
already muted, the unmuted output is muted and the muted output is
unmuted.
If both RGBHV/video and audio are selected and only video is muted, the
output button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
5
.
One at a time
, press and hold the Output 3 and then the Output 4 buttons
(figure 3-53) for approximately 2 seconds until the buttons lights steadily. The
output 3 and output 4 video and audio signals are unmuted.
3
4
3
4
Press and
hold
the Output 3 button.
The button lights
amber
to indicate that
the
RGBHV
and
audio
outputs are not muted.
Press and
hold
the Output 4 button.
The button lights
amber
to indicate that
the
RGBHV
and
audio
outputs are not muted.
Mute outputs one at a time.
= Blinking button
2 seconds
2 seconds
Figure 3-53 — Unmute the outputs
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
