3-5
CrossPoint 450 Plus and MAV Plus Switchers • Operation
2
Output buttons —
The output buttons have two primary functions (•) and
three secondary (
❏
) functions:
•
Select output(s).
•
Identify the selected output(s).
❏
(Output 1 only)
With the Input 1 button, select I/O Group mode. See I/O
grouping on page 3-21.
❏
(8 x 4, 8 x 8, 12 x 4, and 12 x 8 matrix sizes only) Select a preset. See
Using presets on page 3-27.
❏
Mute the output. See Muting and unmuting video and/or audio outputs on
page 3-31.
❏
(Audio models)
Display the audio level of the selected input. See
Viewing and adjusting the input audio level (audio models) on page 3-34.
Control buttons
3
Enter button —
The Enter button has three primary functions (•) and five
secondary (
❏
) functions:
•
Save changes that you make on the front panel. To create a simple
configuration:
!
Specify RGBHV (CrossPoint 450 Plus switchers) or video
(MAV Plus switchers), audio, or both (see I/O selection buttons
[
7
] and [
8
])
!
Press the desired input button (
1
)
!
Press the desired output button(s) (
2
)
!
Press the Enter button.
•
Indicate that a potential tie has been created but not saved.
•
Indicate that a global preset has been selected to be saved or recalled but
that the preset action has not been accomplished.
❏
In the I/O Group mode, select group 1. See I/O grouping on page 3-21.
❏
In the I/O Group mode, indicate that group 1 is selected. See I/O grouping
on page 3-21.
❏
With the Preset, View, and Esc buttons, select Serial Port Configuration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-49.
❏
Select 9600 baud for the RS-232/RS-422 port in Serial Port Configuration
mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-49.
❏
Indicate that the RS-232/RS-422 port is set to 9600 baud Serial Port
Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate
on page 3-49.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
