3-15
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Example 3: Removing a tie from a set of video and audio ties
The following steps show an example in which an existing audio tie is removed
from the current configuration. The steps show the front panel indications that
result from your action.
This example assumes that you have performed example 1 and example 2.
1
.
Press and release the Esc button (figure 3-17).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-17 — Clear all selections
2
.
To select audio only for the tie, if necessary, press and release the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus switchers) button and the
Audio button (figure 3-18).
I / O
RGBHV
AUDIO
Press the RGBHV/Videobutton to toggle on and off.
The button is
unlit
or
background illuminated
when deselected.
Press the Audio button to toggle on and off.
The button lights
red
when selected.
Figure 3-18 — Select audio only
3
.
Press and release the input 5 button (figure 3-19).
O
U
T
P
U
T
S
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
I
N
P
U
T
S
Press and release the Input 5 button.
The button lights
green
.
The Output 3, Output 4, and Output 8 buttons light
red
to
indicate the
audio
ties created in example 1.
The output 1 button
does not light
to indicate the tie created
in example 2 because that tie is
RGBHV
or
video
only.
Figure 3-19 — Select an input
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
