5-17
CrossPoint 450 Plus and MAV Plus Switchers
•
Matrix Software
Green —
Proper operation.
Red —
Component has failed.
White —
Components are not installed.
The CrossPoint 450 Plus and MAV Plus switchers are not available in custom
configurations. Each model has all available monitored components, such as
power supplies and fans, installed. If you see the white “not installed”
indication, the “not installed” component probably became disconnected
during shipment or rough handling.
Smaller switchers (16 x 16 matrix sizes and smaller) do not show the power
supply and fan status blocks.
Name presets —
Allows you to assign a name to each of the 32 memory presets.
Preset names are limited to 12 upper- and lower-case alphanumeric characters,
space, and the _ : = and / characters.
The following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } <
> ’ “ ; : | \ and ?.
Show RS-232 strings —
Displays the ASCII commands that are used by the current
configuration. You can refer to these for RS-232 programming.
I/O group settings —
Allows you to establish I/O groups.
Room configuration —
Allows you to assign outputs to rooms or delete outputs
from rooms.
A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The CrossPoint 450 Plus or MAV Plus switcher
supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.
Initialize —
Initializes and clears any or all of the following: ties, presets, audio
configuration, preset names, icon names, and icons.
Preferences menu
Immediate changes —
Causes configuration changes to take
effect immediately.
Hold/verify changes —
Delays implementation of
configuration changes until the Changes – Take button
is pressed.
Ties as lines —
Displays ties as lines (figure 5-10).
Figure 5-10 — Ties shown as lines
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
