Ericsson AVP 1000 1RU, Reference Manual, Page: 431 / 508

Technical Specification
EN/LZT 790 0023/1 R16A
B-15
B.3.11.5 Operating Times
Note: The times mentioned here are an indication of the typical time for a single
VCM fitted in a chassis. When multiple VCMs are fitted these times may
increase.
Boot Time
The module has a complete boot time (from release of reset to generating valid
Transport Streams) of typically 2 minutes. This time is dependent on a valid
configuration being available when the module requires it to complete its boot process.
Configuration/Mode Changes
Configuration
The VCM, when in the same operating mode, changes configuration within two
seconds plus the video delay. This means that the visible glitch period is two
seconds. This includes most coding parameter changes including GOP size,
resolution changes and filter settings.
Mode
For mode changes (profile changes, frame rate, VBR modes and delay modes), the
configuration is complete within
ten seconds (to include the time to reset the
buffer). The change time is defined as the time from the configuration change being
received on the module to the module outputting a changed bit stream.
Audio/VBI
The module changes the configuration of the audio and VBI data within 1 second
plus the video delay. On the audio, the audible glitch period is 1 second plus the
video delay as the buffer will be cleared. The change time is defined as the time
from the configuration change being received on the module to the module
outputting a changed bit stream.
B.3.11.6 Test Pattern
The video pre-processor can generate the following test patterns.
Table B.19 Test Pattern
Test Pattern Compatibility Matrix
CE-a CE-a J2K CE-x CE-xA CE-HEVC
Black YES YES YES YES YES
Color bars YES YES YES YES YES
Moving object YES YES YES YES YES
Slate
1
YES YES YES
1
= A slate file uploaded by the user will be used.