Ericsson AVP 1000 1RU, Reference Manual, Page: 276 / 508

Web GUI Control
5-100
EN/LZT 790 0023/1 R16A
Parameter Values Description
Master TS Off, On Sets the master Transport Stream for the component..
Vertical Blanking Interval / Ancillary Data
The following parameters are available on the VBI tab of the Properties widget on the
Service Configuration page when a video stream is selected in the Outputs widget. The
same parameters can be accessed through the Advanced/CE-x Analogue/Video/Video
1/Input/VBI Extraction menu on the front panel.
Table 5.74 Vertical Blanking Interval / Ancillary Data Parameters
Parameter Values Description
Enable VBI Pass-thru
Mode Off, On Enable Pass-thru of VBI, ANC and Teletext data from
specified PIDs, instead of extracting them from SDI. Read
only parameter. Not supported in this release.
Description Control
VBI Descriptor Mode Standard, Legacy, Philips, User The source for Closed Captions data encoded as part of
the Video Stream (only applicable when Video Frame Rate
is 29.97 Hz)
VBI Data Descriptor
Insertion Off, On Controls if the VBI Data Descriptor is inserted into the
PMT. Available only if VBI Descriptor Mode is set to User.
VBI Teletext
Descriptor Insertion Off, On Controls if the VBI Teletext Descriptor is inserted into the
PMT. Available only if VBI Descriptor Mode is set to User.
Teletext Descriptor
Insertion Off, On Controls if the Teletext Descriptor is inserted into the PMT.
Available only if VBI Descriptor Mode is set to User.
Proprietary Descriptor
Insertion Off, On Controls if the Legacy Proprietary Descriptor is inserted
into the PMT. Available only if VBI Descriptor Mode is set
to User.
Aspect Ratio (AR) Signaling
Video Index Off, On (Default), On (User) Controls the extraction of Video Index (and thus whether
Video Index can be used as source of AR info).
Default: The default lines will be set to decode Video Index
(11/324 in 25Hz, 14/277 in 29.97 Hz)
User: The User defines the lines used to decode Video
Index.
Video Index Field 1 10 to 22 Specifies which line contains the video index in field 1.
Video Index Field 2 10 to 22 Specifies which line contains the video index in field 2.
SMPTE 2016 Off, On Controls whether SMPTE 2016 data can be used as a
source for AR info.
AFD Sustain Indefinitely, Default after Timeout, Off after
Timeout Control what AFD code goes out when AFD is lost at input.
Indefinitely: Maintains previously received AFD code
indefinitely.
Default after Timeout: Maintains previously received AFD
code for period specified in Sustain Timeout, then drop to
default, i.e. code 1000.
Off after Timeout: Maintains previously received AFD code
for period specified in Sustain Timeout, then switch AFD
off.
AFD Sustain Timeout 0 to 5,10, 20, 50, 100, 120 Control how long previous AFD code is maintained. Zero
means drop to default immediately on loss.