Ericsson AVP 1000 1RU, Reference Manual, Page: 135 / 508

Front Panel Control
EN/LZT 790 0023/1 R16A
4-19
PMT Pid PID assigned to the PMT that describes the current service.
Logical Channel Appears in the NIT and provides a default channel number label for
the current service.
PCR PID PID of the TS packets that carry the clock reference for the current
service. If the service has a component with the Embedded PCR
parameter set to On, this field contains the PID of that particular
video stream and it is read only.
Scrambling Off, BISS-1, BISS-E. Disables or enables the scrambling of the
current service by the Basic Interoperable Scrambling System with
or without encrypted keys.
BISS SW
The 12 hexadecimal digit clear session word used for scrambling
the current service. Visible only if BISS-1 is selected for Scrambling.
BISS ESW The 16 hexadecimal digit encrypted session word used for
scrambling the current service. Visible only if BISS-E is selected for
Scrambling. The key entered here is encrypted by the BISS Injected
ID found under Advanced/System/Base Unit.
Current State The Setmode state of the Transport Stream. Read only parameter.
Change State Sets the Setmode state of the Transport Stream. The options
available depends on the value set for MGP Mode under
Advanced/System/MGP Support.
Transport Stream ID The label to identify the current Transport Stream from any other
multiplex within a network.
Network Name The network name as used in the NIT.
Network ID The network ID as used in the NIT.
Mode CBR, VBR.
PSI-SI Level
Off, On (PAT, PMT only), On (PAT/PMT/SDT/CAT/NIT). Sets which
tables are inserted into the Transport Stream.
Send Extended NIT (SIRG) On, Off. Determines whether Carrier ID is to be inserted in the NIT.
Available only when the PSI-SI Level is set so that NIT is generated.
PMT Repetition Period The repetition interval of the PMT table expressed in ms.
Transport Stream Bit Rate The Bit Rate of the Transport Stream.
Bit Rate Tracking Mode Off, Maximise video. Enables or disables Bit Rate tracking for the
current Transport Stream.
Auto Enable If set to true, it automatically re-enables the Transport Streams
when all the specified error conditions are cleared.
Auto Disable Never, Audio Lost, Video Lost, Any Upstream CRITICAL Alarm, Any
CRITICAL alarm. Disables the output when the set condition is met.
The Transport Stream can be set to be re-enabled at the Auto
Disable option.
G.703 Transceiver (Slot <m>) Selects the G.703 Transceiver card.
Add New Transport Stream
Adds a new Transport Stream to the output. Displayed only if no
Transport Stream is defined for the ASI output.
Add Existing Transport Stream Creates a copy of an existing Transport Stream at the current
output. Displayed only if no Transport Stream is defined for the ASI
output.