Ericsson AVP 1000 1RU, Reference Manual, Page: 119 / 508

Front Panel Control
EN/LZT 790 0023/1 R16A
4-3
4.1 Introduction
This chapter describes the features and options provided by the Front Panel menus
for controlling the Advance Video Processor Series.
Note: After powering up (see Chapter 3, Getting Started ), wait for initialization to
complete (approximately 1.5 to 3 minutes, depending on the number of
options fitted in the chassis) before attempting to use the front panel menus
and controls.
4.2 Using the Front Panel Controls
The user interface for the Front Panel consists of an ON/OFF power switch, light
bar, mini USB, rotary knob alphanumeric keypad, pushbuttons, main display and
confidence monitor that are used to set-up, control and monitor the unit.
The unit can be controlled through the front panel by the rotary knob and the
keypad. In a given state only the illuminated keys are functional.
Figure 4.1 Advanced Video Processor Front Panel
4.2.1 Light Bar
The light bar indicates the alarm state of the unit.
4.2.2 Power Switch
The power switch is used for turning the unit On or Off . The switch is recessed to
prevent the unit from being accidentally switched off.
4.2.3 Mini USB
The mini USB connector provides an interface for remote web access and update
from a computer, and for saving or exporting configurations to, and loading or
importing configurations from a USB stick.
Power Switch
Light Bar Mini USB Rotary Knob Main Display
Keypad Confidence Monitor