manualshive.com logo in svg

Ericsson AVP 1000 1RU, Reference Manual, Page: 351 / 508

Share
Download
Ericsson AVP 1000 1RU Reference Manual Download Page 351

 

Options, Licensing and Upgrades 

 

 

EN/LZT 790 0023/1 R16A

 

 

7-5 

 

 

 

Note:

  In a 4-slot dual AC PSU chassis, slots numbers 5 and 6 are not available.  

The features of the available Video Compression Modules (VCMs) and other Option 
Cards are described in the following paragraphs. 

7.4 

Video Compression Modules 

7.4.1 

CE-a VCM 

7.4.1.1 

Overview 

The CE-a Video Compression Module (VCM) is a single card that can encode a 
single video input. By default the basic card supports encoding SD MPEG-2 video 
and MPEG-1 Layer II Audio. Video and audio encoding functionality is extended by 
the purchase of feature licenses. 

 

Figure 7.2  CE-a VCM 

Table 7.3  CE-a Encoder Video Profiles and Bit Rate Ranges 

Video Encode Profiles 

Bit Rate Range (Mbps) 

Licenses Required 

SD MPEG-2 Main Profile @ Main Level 4:2:0 
8bit 

0.5 - 15 

None 

HD MPEG-2 Main Profile High Level 4:2:0 8bit  

2.0 - 50 

CE/SWO/CE-a/HD 

SD H.264

 

Main Profile Level 3.0 4:2:0 8bit  

SD H.264

 

High Profile Level 3.0 4::0 8bit  

SD H.264

 

High Profile Level 3.1 4:2:0 8bit 

0.5 – 10 

0.5 – 12.5 

0.5 – 17.5 

CE/SWO/CE-a/H264 

HD H.264 Main Profile Level 4.0 4:2:0 8-bit  

HD H.264 High Profile Level 4.0 4:2:0 8-bit  

HD H.264 High Profile Level 4.1 4:2:0 8-bit 

1.0  – 20 

1.0  – 25 

1.0  – 50 

CE/SWO/CE-a/H264 and 
CE/SWO/CE-a/HD 

 

Notes:

  Up to 6 CE-a modules can be fitted in the unit, but limitations due to 

operational temperature may apply. 

 

If the appropriate licenses are available, up to 16 channel pairs of audio can 
be encoded using the MPEG-1 Layer II algorithm, 6 audio channel pairs can 
be encoded in Dolby Digital or 6 channel pairs in (HE-)AAC.  

There is also an option to configure the unit to pass-thru pre-encoded Dolby Digital, 
Dolby-E or Linear PCM audio. 

Audio decode is not supported. 

Summary of Contents for AVP 1000 1RU





























































































































































































































































































































































































































































































































Reviews:

No comments