Ericsson AVP 1000 1RU, Reference Manual, Page: 245 / 508

Web GUI Control
EN/LZT 790 0023/1 R16A
5-69
Table 5.34 ANC Component Parameters
Parameter Values Description
PID 32 to 8190 Sets the packet identifier associated with the component.
Bit Rate Weighting Fixed
Specifies the weight associated to the component in the
Bit Rate Tracking algorithm. For audio stream, this is Fixed
and read only.
5.5.3.1.6 PCR Stream Configuration
The video encoding module can generate a separate PCR stream. The PCR stream
contains timing reference that can be used for decoding the elementary streams
included in the same service as the PCR stream itself. To use the PCR stream as a
timing reference for decoding, set the PCR PID parameter associated with the
service to the PID assigned to the PCR stream.
The following parameters are available in Properties widget on the Service
Configuration page when a PCR Stream is selected in the Outputs widget. The
same parameters can be accessed through the Output/<output name>/Transport
Stream ID: <n>/Service List/<service name>/Component List/Slot <m> Video 1
PCR stream on PID <n>
menu on the front panel.
Table 5.35 PCR Stream Configuration Parameters
Parameters Values Description
PID 16 - 8190
The packet identifier assigned to packets carrying the
program clock reference values.
Bit Rate Weighting Fixed
Not relevant for the PCR component. Read only
parameter.
5.5.3.2 CE-a J2K VCM
5.5.3.2.1 Video and VBI Stream Configuration
Video Input and Pre-Processing
The following parameters are available on the Input tab of the Properties widget on
the Service Configuration page when a video component is selected in the
Outputs widget. The same parameters can be accessed through the
Advanced/CE-a J2K/Video/Video1/Input menu on the front panel.
Table 5.36 Video Input and Pre-Processing Parameters
Parameter Values Description
Video Input Lock Yes, No Shows whether there is a video lock to the format specified
through the parameters below. Read only parameter.
Source SDI The video will be sourced from the SDI/HD-SDI input on
the rear panel.
Bars An internally generated color bars test pattern will be used
as the video source.
Black An internally generated black test pattern will be used as
the video source.