Ericsson AVP 1000 1RU, Reference Manual, Page: 274 / 508

Web GUI Control
5-98
EN/LZT 790 0023/1 R16A
Parameter Values Description
Video Bit Rate The valid bit rate range depends on the selected
video profile. Defines the bit rate to be used by the compressed video
component. If Bit Rate Tracking Mode is set to Maximize
Video for the Transport Stream that contains the video
component, and the Bit Rate Weighting of the component
is set to other than Fixed or Minimal, this field is read only.
Buffer Mode CBR Constant Bit Rate operation.
Low Delay Reduced encode delay (typically 350ms) achieved by
removing pre-processing functions. Bit Rate, GOP
structure and GOP length impact the delay. The IP GOP
structure will give lowest delay, but with reduced quality.
Mega Low Delay Encode delay reduced further by removing frame-sync in
pre-processing. Bit Rate, GOP structure and GOP length
impact the delay. The IP GOP structure will give lowest
delay, but with reduced quality.
Aspect Ratio 16:9, 4:3 Does not affect the video encoding but rather indicates
what the desired aspect ratio for the decoded picture (not
the pixel). If no other mechanism such as WSS in the VBI
is used, the video output image will use this aspect ratio.
GOP Length 4 to 250 Defines the nominal distance in steps of video frames
between two consecutive I frames in the encoded bit-
stream.
GOP Structure IP, IBP, IBBP, IBBBP, IBBBBBBBP Sets the number of B frames between reference frames.
IBBBBBBBP can only be used for 720p video format
encoded with a H.264 video profile.
Closed GOPs Off, On Enables or disables the usage of Group of Pictures in
which the predicted frames can have their reference from
outside the group.
Scene Cut Detection On, Off When enabled, minimizes the negative effect the scene
changes have on the bit rate by inserting an I-Frame when
a change is detected. It also affects the GOP length.
Delay Displays the actual video encoding delay. Read only
parameter.
Stills Detection Off, Intelligent, Clamp Detects if the video is a still picture, and adjusts the
encoded video bit rate accordingly when operating in VBR
mode.
Film Mode Off, On Sets encoding parameters that give better image quality
for film like sources. Available only for frame rates of 29.97
or 59.94 Hz when the resolution is set to other than SIF.
Inloop Filter High, Normal, Low, Very Low, Auto Sets the characteristics of the filter placed in the feedback
loop of the encoder. Applying the filter to the picture can
increase picture sharpness.
Max CABAC Bit Rate Depends on the Video Profile set. Controls the bit rate at which the encoder switches from
CABAC to CAVLC entropy coding.
SEI Encapsulation
Mode Combined, Mediaroom Defines how the SEi messages are formatted in the picture
header for H264. For combined, all the different types of
messages (for example AFD) are bundles into one NAL
packet. For Mediaroom each type of message is put into
its own NAL packet. This was done for STB compatibility
issues
3D Mode Off, Side by Side Frame Packing, Top and
Bottom Frame Packing Configures output to include information in the SEI
message depending on the 3D mode. Frame Sync Delay
in SEI is only available for CE-x with CE/SWO/CE-x/H264,
CE/SWO/CE-x/HD and CE/SWO/CE-x/3D licenses.