SMARC T335x Carrier Board Hardware Design Guide, Document Revision 1.2
Figure 5: SMARC T335X edge finger secondary pins
Figure 6: Pin numbering schema on the module connector land
pattern
The rest of the sections in this chapter describe the signals on
SMARC
MXM3
connector that is provided over the edge-fingers of the
SMARC
module. Refer
to the
SMARC
Specification for information about this.
The “
#
” symbol at the end of the signal name indicates that the active or
asserted state occurs when the signal is at a low voltage level. When “
#
” is not
present, the signal is asserted when at a high voltage level. Differential pairs
are indicated by trailing '
+
' and '
-
' signs for the positive or negative signal.
