130
Automatic
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Manual switching:
Shows whether a position message is used by the motor to switch from automatic to
manual, i.e. whether automatic mode is switched off by pressing a button if there is an
external manual operation.
Default setting: No.
6.4.4. Set temperature regulator
System > Set-up automatic > Temperature regulator
You can change the following automatic settings for heating or cooling/air-condition-
ing:
•
Time switch mode
•
Automatic reset
•
Manual switching
Time switch mode:
Tap the field to set the times, from which the temperature mode (Comfort, Standby,
Eco) changes and set the accompanying priority ("Prio 2" for switching in everyday
mode and "Prio 1" for central switching with higher priority). Enable one or more times
in the list. If you want to change the periods, touch the tool icon.
6.3.4. Set time switch event, Page 107
Automatic reset:
Shows which automatic resets apply to this heating. Touch the field in order to activate
the daily automatic reset and/or reset after a manual operation.
The general Automatic Reset occurs daily at the same time. In addition, automatic
mode can be reactivated a certain period after a manual operation. You can set the time
or period for automatic resets.
System > Set automatic > General settings > Automatic reset
6.3.9. Specify automatic reset, Page 109
Manual switching:
Shows whether feedback from the channel is used to switch from automatic to manual,
i.e. whether automatic mode is switched off by pressing a button if there is an external
manual operation.
Default setting: No.
6.4.5. Set light automatic mode
System > Set-up automatic > Light
For lights, you can change the following automatic settings (depending on light and
ETS setting):
•
Timed switching
•
Twilight switching
