54
Basic settings in the ETS
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Type of output: RGB
The object type has to be selected here the same as set for the light (a joint or separate
object).
Type of output: RGBW
Type of output: Fans
The type of contract selected here has to be the same as set for the fan.
With the setting "Control fans via dimming object in manual mode", not only can the
fan be switched on and off with the buttons, but also as a result of a long-term "Dim-
ming" command.
Transmit values for
Brightness change larger (in %)
(
only if HCL control is used)
1 ... 50; 5
or
Colour temperature change larger (in Kel-
vin)
(
only if HCL control is used)
1 ... 500; 50
Object type for RGB
• separate for red, green, blue
• together for red, green, blue
Use separate brightness object
No • Yes
Object type for RGB+W
• separate for red, green, blue and white
• together for red, green and blue, separate
for white
• together for red, green, blue and white
Use separate brightness object
No • Yes
Type of control
• smooth
• Staged (Bit-object per step)
• Staged (Byte-object)
Control fan via dimming object in manual
mode
(
only for smooth controls)
No • Yes
Number of steps
(
only for smooth controls with Bit object)
1 • 2 • 3 • 5
Switch on step 1...4 also for step 2...5 (to 5)
(
only for smooth controls with Bit object
and multiple steps)
No • Yes
Number of steps
(
only for smooth controls with Byte object)
1 ... 99; 10
