62
Basic settings in the ETS
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Type of output: Input text
Type of output: Alarm message
Alarm message A/B
On
use of the safety module
, see chapter 7.5. Safety module settings, Page 139
Sensors
This section describes inputs for sensors.
Type of output: Sensor temperature
Type of output: Sensor temperature, humidity
Type of output: Sensor temperature, humidity, CO
2
Type of output: Sensor temperature, humidity, VOC
When selecting the sensor, the selected sensors appear on the display of the
Casa-
Connect KNX
.
Block C
The menu item only appears if it is selected for "function blocks" that channels of type
C are to be used.
The data for each connected temperature regulator can be transmitted with these 15
channels. I.e. the setpoints for an independent temperature regulator connected via the
KNX bus can be specified with the
CasaConnect KNX Control Center
.
Enter a name for the channel and select an icon (See “Symbol overview” on page 65).
The name of the channel can also be changed subsequently on the
CasaConnect
KNX Control Center
. The most recent change in the ETS or the control center ap-
plies.
Function block C (temperature regulator):, Page 81
Value can be adjusted via display
Yes
Text
Alarm A/B [Free text]
Symbol
0 ... 65535
Receipt monitoring
do not use • 5 s • 10 s • ... • 2 h
Object value when acknowledging alarm
0 • 1
Use in safety module
• Do not use
• as outer skin intruder alarm
• as inner skin intruder alarm
• as vandalism alarm
• as closure alarm
• as malfunction alarm
• as attack alarm
• as technical alarm (group 1)
• as technical alarm (group 2)
