40
Basic settings in the ETS
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
4.1.
Procedure
After the correct installation and commissioning, you should first make the basic set-
tings in the ETS (see this chapter). Then you can set up the control center in the control
menu
System > Set screen
(See chapter 5.2 “The "Set screen" menu” on page 76.).
After programming in the ETS, a reset must be performed at the control center (also
for changes).
5.3.2. Service settings, Reset
System > System setting > Service > Reset
4.2.
KNX transmission protocol
Abbreviations
Flags:
C: Communication
R: Read
W: Write
T: Transmit
U: Update
4.2.1. List of all communication objects
1-69: General objects, sensor data, display settings:
No.
Text
Function
Flags
DPT type
Factor
1
Software version
Output
L-KÜ
[217.1]
DPT_Version
2 Bytes
2
Device malfunction
Output
L-KÜ
[1.1]
DPT_Switch
1 Bit
3
Lock object outputs
Input
-SK-
[1.1]
DPT_Switch
1 Bit
5
Date/time
Input
-SKÜ
[19.1]
DPT_DateTime
8 Bytes
6
Date
Input
-SKÜ
[11.1]
DPT_Date
3 Bytes
7
Time
Input
-SKÜ
[10.1]
DPT_TimeOfDay
3 Bytes
8
Date and time query
Input/Out-
put
-SKÜ
[1] 1.xxx
1 Bit
9
Presence simulation Start/
Stop
Input/Out-
put
LSKÜ
[1.1]
DPT_Switch
1 Bit
10
Location latitude [°]
Input
-SKÜ
[14.7]
DPT_Value_AngleDeg
4 Bytes
