81
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
Use in safety module:
Shows the use of the alarm message in the safety module. Touch the field and make
your selection.
The different possible selections are explained in the following chapter:
7.5. Safety module settings, Page 139
Switching delay external (only for intruder alarm):
Shows whether an intruder alarm is triggered after an external switching on after the
alarm delay time has expired. Touch the field and make your selection.
Switching delay by detector (only for intruder external):
Shows whether the alarm is live immediately after the detector is deactivated or only
after the alarm delay time has expired. Touch the field and make your selection.
Retain alarm (not for intruder):
Shows whether the alarm should remain active after the detector has returned to "Off"
but the message has not yet been acknowledged. If "Yes" is selected, the alarm does
not disappear until the message has been acknowledged AND the detector returns to
"Off". Touch the field and make your selection.
Flashing background light (only for "do not use" in the safety module):
Shows whether the background lighting flashes with the alarm. Touch the field and
make your selection.
Emit alarm tone (only for "do not use" in the safety module):
Shows whether an alarm tone is emitted. Touch the field and make your selection.
Email notification (only for "do not use" in the safety module):
Shows whether an email notification is sent if there is an alarm. Touch the field and
make your selection.
Snooze function after acknowledgement (not for installation/close alarm):
Shows the period, after which an alarm is reactivated after the acknowledgement.
Touch the field and make your selection.
Function block C (temperature regulator):
A list of all the temperature regulators is displayed, which have been set up for com-
munication with the control center (ETS).
4.3.8. Function blocks, Page 52
Push the button for the temperature regulator that you want to set up.
