104
Automatic
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
6.1.
Procedure
So that you can set the automatic functions in this chapter, the basic setting must al-
ready be made in the ETS (See chapter 4 “Basic settings in the ETS” on page 39) and
in the System control menu (See chapter 5 “Basic settings in the Control Center” on
page 75).
6.2.
Set automatic mode
System > Set automatic mode
In the
System > Set automatic
menu you can make the following settings:
•
Specify automatic functions of the individual motors and devices
•
Adjust general automatic settings: Twilight value, movement delays, time
switch, ventilation lock, night back cooling, frost alarm, movement
restriction,wind delay and automatic reset
To be able to set the automatic functions, the basic settings in the
ETS and in the control menu
Set screen
must already have been made.
