92
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
•
Service: Activate the cleaning mode, restart the control center, reset to factory
settings, change internal settings and start remote maintenance
•
Access code: Set an access code that protects the "Set screen" and "Set
automatic" menus from unauthorised changed.
•
SD card: Save the setting details for the control center on SD card or read from
SD card
•
Internet: Set up the internet/network connection
•
Email message: Specify the sender and recipient email address
•
Device information: Load updates and view software versions of the control
center
5.3.1. Settings
In the
System > System settings > Settings
menu you can make the following set-
tings:
•
Time and date
•
Language
•
Screen
•
Key tone
•
Time zone
•
Location
Enter time and date manually
Date and time are displayed in the top right of the start page. Normally, the data is re-
ceived via the bus. It is mostly received within approx. 10 minutes of the system start-
ing.
If there is no time signal, "Please set time!" is displayed on the screen. In this case, set
the time manually.
Time and date:
Shows the current time and date. Tap the field to enter the data manually.
Change language
The display can be set to German, English, French and Italian.
Language:
Shows the currently selected language. Touch the field to select a different language.
Set up screen
Display settings can be modified on the display or in the ETS menu.
