51
Basic settings in the ETS
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
•
"Please set time" is displayed on the screen of the
CasaConnect KNX
instead
of the weather animation.
No weather data
(
CasaConnect KNX
does not receive an outdoor temperature val-
ue, wind value and precipitation status from the bus after starting / resetting):
•
"Not all weather data received correctly" is displayed on the screen of the
CasaConnect KNX
instead of the weather animation.
•
There is no automatic control active and the frost, wind and rain alarms are
cautiously active, i.e. motors with the appropriate settings for frost, wind and
rain protection receive the command via the bus to move to the safe position.
•
The normal automatic operation is only started again when the following
weather data has been received: Wind value, precipitation status, outdoor
temperature value.
Set which data you want to use:
Outside air
Wind
Precipitation
Sunlight
Use relative humidity
No • Yes
Use absolute humidity
No • Yes
Use air pressure
No • Yes
Use VOC
No • Yes
Use CO
2
No • Yes
Use main sensor speed
Yes
Use main sensor malfunction object
No • Yes
Use main sensor direction
No • Yes
Use sensor 1...4 speed
No • Yes
Use sensor 1...4 malfunction object
No • Yes
Use precipitation
Yes
Use precipitation malfunction object
No • Yes
Use precipitation volume
No • Yes
Use outside brightness
Yes
Use colour temperature
No • Yes
Use UV index
No • Yes
Use UV index text
No • Yes
Use heat radiation sensor 1...4
No • Yes
