49
Basic settings in the ETS
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
If no location data is received via KNX, the location shown on the display is used.
4.3.5. Sun position
The sun position calculated by the control center from the location and time can be pro-
vided by the KNX bus to other participants.
Here you can set the transmission behaviour and format of the sun position.
4.3.6. Alarm/Central functions
Alarm functions
Here you can set whether you want to use alarm object 1...3. This input object can be
linked to 2 scenes: If the alarm is triggered, the first scene is called. When the alarm is
acknowledged, the second scene is called.
If an alarm object is used, you can still set the icon displayed by the control center (See
“Symbol overview” on page 65). The icon can also be selected subsequently at the
control center.
System > Set screen > Alarm > Alarm obj. 1-3 > Channel icon
Alarm:, Page 77
Central functions
Here you can set whether you want to use central object 1...4. This input object can be
linked to a scene: If the event occurs, the first scene is called.
If a central object is used, you can still set the icon displayed by the control center (See
“Symbol overview” on page 65). The icon can also be selected subsequently at the
control center.
System > Set screen > Central function > Central obj. 1-4 > Channel icon
Central function:, Page 78
Sun position
• Do not send
• send periodically
• send if there is a change
• send on change and periodically
Transmission format (
only if sent
)
2 Byte (DPT9.*) • 4 Byte (DPT14.007)
on change of
(is only transmitted if "on change" is
selected)
1 degree • 2 degrees • ... • 15 degrees
Send cycle
(is sent only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Use alarm object 1...3
No • Yes
displayed icon (
if only corresponding alarm
object is used
)
0 ... 65535
