110
Automatic
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
After a manual operation, the motor or device remains in manual mode, automatic
mode is switched off. However, you can set it so that automatic mode switched on
again after a certain time. Motors and devices are also reset to automatic with the gen-
eral automatic reset.
Automatic resets prevent the motors from being operated manually and then remain-
ing in an unfavourable position (window remains accidentally open, blind retracted de-
spite the sun.
The general automatic reset and reset after a manual operation can be activated and
deactivated in the automatic menu for each working group and each device separately.
Automatic reset:
Shows the time of the automatic reset and the period to reset after manual operation.
Tap the field to adjust the two settings.
Set the
Time for the daily automatic reset
.
Default setting: 3:00 a.m.
Set the
Period after manual operation
, after which automatic mode should be en-
abled again.
Default setting: 60 minutes.
6.4.
Set automatic mode for motors and
devices
6.4.1. Set automatic sun protection
System > Set automatic mode > Awning | Blind | Shutters
You can change the following automatic settings for awnings, blinds and shutters:
•
Light intensity
•
Sun direction
•
Sun height
•
Actuation position shading
•
Slat position (for blinds)
•
Indoor sensor is evaluated
•
Indoor temperature lock
•
Night closing
•
Rain automatic
•
Timed closing (with actuation position)
•
Outdoor temperature lock
•
Behaviour during outdoor temperature lock
•
Timed opening
•
Frost alarm
•
Wind sensor which is evaluated and delay
•
Wind alarm
•
Rain alarm
