76
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
5.1.
Procedure
After the correct installation and commissioning, you should first make the basic set-
tings in the ETS (See chapter 4 “Basic settings in the ETS” on page 39.). Then you can
set up the control center in the control menu
System > Set screen
(this chapter).
5.2.
The "Set screen" menu
System > Set screen
In the
System > Set screen
menu you can make the following settings:
•
KNX settings (including naming the functions, display in the manual and start
menu)
•
Create group keys and scenes for the manual menu (with the possible settings
of type, name, display in the manual menu and allocation of the motor groups)
•
Set up the start page and the manual menu (channel sequence and bookmark
management)
•
Weather data (adjustment of the temperature display on the weather station
and selection of the indoor sensor for the weather data display)
•
Set-up safety module
•
Set up presence simulation
