94
Basic settings in the Control Center
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
For the automatic switch-off, the central control unit of the
CasaConnect KNX Con-
trol Center
records the brightness. If it is bright in the room, the display lighting is au-
tomatically switched on. If the screen is touched, it also re-activates.
Brightness-dependent:
The automatic brightness function adjusts the display screen to the light conditions in
the room (the darker the room, the darker the display screen lighting).
If automatic mode is off, the screen brightness can be set as in percent by using a slid-
er.
Brightness during operation:
If this function is on, the brightness is increased to the set percentage if the screen is
touched. This ensures good legibility. If no instructions are entered for around 1 min-
ute, the screen brightness is reduced again.
Switch off/on key tone
The key tone, which is emitted as feedback when a button is touched, can be switched
off and on again.
Key tone:
Shows whether the key tone is on or off. Touch the field to change the setting.
Select time zone
So that the date and time can be displayed correctly, the time zone must be entered.
Time zone:
Shows the time zone currently set. Touch the field to change the setting.
The time zone can be entered "by location" or "user defined". Touch the field to switch
between the options.
When selecting by location, choose the city from the list provided. For user-defined set-
ting, enter the time zone based on GMT (Greenwich Mean Time).
Enter location
The location is automatically received by the bus. If there is no location signal, set the
location here.
The information on the location of the building is necessary in order to correctly indi-
cate the position of the sun. If you do not provide this location data, the blinds will not
be correctly controlled.
