139
Tables, maintenance
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
7.5.
Safety module settings
Alarm messages can be assigned to different categories in the safety module, resulting
in different responses being triggered. The following table shows the possible alloca-
tions of the alarm messages if an alarm is triggered AND the live switching conditions
exist.
7.6.
Personal settings data of automatic
mode
Awnings, blinds, shutters:
Use in the
Safety module
Response
Do not use
Alarm message is not used in the safety module, but
can trigger set responses
as intruder alarm
outer skin
for internal and external live switching, an intruder
alarm is triggered
as intruder alarm
Indoor skin
for external live switching, an intruder alarm is trig-
gered
as vandalism alarm
a vandalism alarm is triggered irrespective of live
switching status
as closure alarm
live switching is prevented until the cause of the closure
alarm has been corrected
as malfunction alarm
a malfunction is reported and live switching is pre-
vented until the cause has been corrected, irrespective
of the live switching status
as attack alarm
an attack vandalism alarm is triggered irrespective of
live switching status
as technical alarm (group 1/
2)
a technical alarm is triggered irrespective of the live
switching status (e.g. fire alarm, leak alarm)
Output
Name
Function
Light intensity (kLux)
Sun direction
Sun height
Actuation position
Slat position
