V&T Technologies Co., Ltd.
http://www.ecodrivecn.com
Chapter 6 Parameter Description
73
If the parameter to be displayed has proportion relation with a physical value in the operation display
parameter defined by P2.02, P2.04 can be used to designate the physical value as the display
benchmark, and P2.05 can be used to set the coefficient of the display benchmark.
When the proportion display parameter is set (i.e. P2.05
≠0), the physical value will be automatically
added into the operation display parameter group and can be viewed by pressing >>key. At this time,
there are 5 display parameters. The LEDs for the newly added parameter are LED A and LED V, both of
which shall be on.
Up to 4 parameters can be set and display at stopping status, and viewed circularly by pressing >>key.
Display of operation panel
Unit place:
0: Reference frequency (Hz) ;
1: Bus voltage (V) ;
2: AI1 (V) ;
3: AI2 (V) ;
4: AI3 (V) ;
5: DI (%) ;
6: External counts
7: Motor rotation speed (rpm);
8: Close loop reference (%);
9: Close loop feedback (%);
A: Reference torque (%);
B: Reserved;
C: Reserved;
D: Reserved;
E: Reserved;
F: Reserved
Tens place
Same as above
Hundreds place
Same as above
Thousands place
Same as above
If the parameter to be displayed has proportion relation with a physical value in the stopping display
parameter defined by P2.03, P2.06 can be used to designate the physical value as the display
benchmark, and P2.07 can be used to set the coefficient of the display benchmark.
When the proportion display parameter is set (i.e. P2.07
≠0), the physical value will be automatically
added into the stop display parameter group and can be viewed by pressing >>key. At this time, there are
5 display parameters. The LEDs for the newly added parameter are LED A and LED V, both of which
shall be on.
P2.03
Display parameter selection at stopping
0~FFFF(3210)
P2.06
Stop proportion display benchmark
0~F(0)
P2.07
Stop proportion display coefficient
0.0~1000.0 %(0.0%)
P2.04
Running proportion display benchmark
0~F(0)
P2.05
Running proportion display coefficient
0.0~1000.0%(0.0%)
