V&T Technologies Co., Ltd.
http://www.ecodrivecn.com
Appendix B Control Mode Setting Process
140
Appendix B Control Mode Setting Process
1. Setting Process for Auto-tuning
Parameter auto-tuning under Vector control 1 Parameter auto-tuning under vector control 2
START
Setting P0.01=5
Setting rated voltage of motor
P0.12
Setting rated frequency of motor
P0.15
Setting upper frequency limit of motor
P0.13
Setting max frequency of motor
P0.11
Setting motor parameter
（
P9.00
～
P9.04
）
Setting P9.15=1
Press RUN key to perform
parameter tuning
END
Motor with multi V/F
Setting P4.00=1
，
auto torque boost
invalid
，
please
setting about
P0.16=3% manual
torque boost
Motor with multi power V/F
Please select correct P4.00to
2
～
6 according to upon
variable torque load
Setting correct
P4.01
～
P4.08
N
Y
Y
N
START
Setting P0.01=5
Setting Rated voltage of motor
P0.12
Setting basic frequency of motor
P0.15
Setting upper frequency limit of motor
P0.13
Setting max frequency of motor
P0.11
Setting parameter of motor
（
P9.00
～
P9.04
）
Setting P9.15=2
Press RUN key to perform
parameter tuning
End
First step, must disconnected
from the load
