Eaton EMR-4000, Installation, Operation And Maintenance Manual

Page: 935 / 960

EMR-4000 IM02602009E
Name Description
Profibus.Comm Cmd 15 Communication Command
Profibus.Comm Cmd 16 Communication Command
IRIG-B.IRIG-B active Signal: If there is no valid IRIG-B signal for 60 sec, IRIG-B is regarded as inactive.
IRIG-B.High-Low Invert Signal: The High and Low signals of the IRIG-B are inverted. This does NOT mean that the wiring is faulty. If
the wiring is faulty no IRIG-B signal will be detected.
IRIG-B.Control Signal1 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal2 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal3 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal4 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal5 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal6 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal7 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal8 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal9 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal10 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal11 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal12 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal13 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal14 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal15 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal16 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal17 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
IRIG-B.Control Signal18 Signal: IRIG-B Control Signal. The external IRIG-B generator can set these signals. They can be used for
further control procedures inside the device (e.g. logic funtions).
SNTP.SNTP active Signal: If there is no valid SNTP signal for 120 sec, SNTP is regarded as inactive.
Statistics.ResFc all Signal: Resetting of all Statistic values (Current Demand, Power Demand, Min, Max)
www.eaton.com 935