EMR-4000
IM02602009E
PROPER USE
Any unauthorized modifications to or use of this equipment outside its
specified mechanical, electrical, or other operating limits may cause
personal injury and/or property damage, including damage to the
equipment. Any such unauthorized modifications: (1) constitute "misuse"
and/or "negligence" within the meaning of the product warranty, thereby
excluding warranty coverage for any resulting damage; and (2) invalidate
product certifications or listings.
The programmable devices subject to this manual are designed for
protection and also control of power installations and operational devices
that are fed by voltage sources with a fixed frequency, i.e. fixed at 50 or 60
Hertz. They are not intended for use with Variable Frequency Drives. The
devices are further designed for installation in low voltage (LV)
compartments of medium voltage (MV) switchgear panels or in de-
centralized protection panels. The programming and settings have to meet
all requirements of the protection concept (of the equipment that is to be
protected). The User must ensure that the device will properly recognize
and manage (e.g.: switch off the circuit breaker) on the basis of User
selected programming and settings all operational conditions (failures).
Before starting any operation and after any modification of the
programming/settings, make a documented proof that the programming
and settings meet the requirements of the protection concept.
The self-supervision contact has to be wired with the master
communication system (SCADA) in order to supervise and monitor the
state of health of the programmable protective device.
Typical applications for this product family/device line are for example:
Feeder protection;
Mains protection;
Transformer protection and
Machine protection.
This device is not designed for any usage beyond these applications. This
applies also to the use as a partly completed machinery. The manufacturer
cannot be held liable for any resulting damage. The User alone bears the
risk if this device is used for any application for which it was not designed.
As to the appropriate use of the device: the technical data specified by
Eaton Corporation has to be met.
www.eaton.com
11
