EMR-4000
IM02602009E
Parameter
Description
Options
Default
Menu path
Printed Circuit
Board
Printed Circuit Board
»A« Standard,
»B« Conformal Coating
»A« Standard
[EMR-4000]
There are two mounts available for the EMR-4000-2: a Standard Mount and a Projection Mount. To order the
EMR-4000-2 with a Standard Mount, append the device code with a zero (0). To order the EMR-4000-2 with a
Projection Mount, append the device code with a one (1). Refer to the table for details of the available device options.
EMR-4000-2 Eaton Motor Relay
Removable Terminals
EMR-4000-2
A
0
B
A
1
Choose from the following options.
Hardware Option 1
8 DI, 5 Outputs, 4AO, Removable Terminals, Zone
Interlocking,URTD Interface, IRIG-B, Small Display.
A
Hardware Option 2
Phase Current 5A/1A, Ground Current 5A/1A, Power Supply
Range: 19-300 Vdc, 40-250 Vac.
0 (Zero)
Phase Current 5A/1A, Sensitive Ground Current 0.5A/0.1A,
Power Supply Range: 19-300 Vdc,
40-250 Vac.
1
Communication Options
Modbus-RTU (RS-485) + DNP3.0 (interface with terminals)
B
Modbus TCP + DNP3.0 (Ethernet 100MB / RJ45)
C
Modbus RTU + DNP3.0 (Fibre optic interface, ST connector)
F
DNP3.0 + Modbus RTU (RS485 / D-SUB interface)
G
IEC-61850 (Ethernet 100MB, RJ45)
H
Modbus-RTU (interface with terminals) + Modbus-TCP (Ethernet 100MB,
RJ45)
I
IEC61850 / Ethernet 100MB (Single LC connector)
K
Conformal Coating Options
None
A
Conformal Coated Circuit Boards
B
Mounting Options
Standard Mount
0 (Zero)
Projection Panel Mount
1
www.eaton.com
24
