![background image](http://html1.mh-extra.com/html/eaton/easy800/easy800_manual_3950236086.webp)
3 Commissioning
3.8 The first circuit diagram
82
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
Once you have connected pushbutton S1 and S2, you can test your circuit
diagram straight away.
3.8.3 Testing the circuit diagram
▶
Switch back to the main menu and select the STOP RUN menu option.
The current operating mode is indicated in the device display by a tick at RUN
or STOP stop. Pressing the OK pushbutton enables you to toggle between
the modes.
▶
Press the OK pushbutton in order to change to RUN operating mode.
3.8.4 Control options in RUN mode
There are two control options in RUN mode. Control of:
1. Inputs and outputs with Status display
2. power flow with power flow display
Status display during RUN mode
▶
Change to the status display and press pushbutton S1. Do not execute
pushbutton S2.
The contacts for inputs I01 and I02 are activated and relay QS1 picks up,
indicated by the highlighted numbers.
Test using the power flow display
▶
Change to the circuit diagram display and press pushbutton S1.
The relay picks up and the easy800 displays the power flow with a double
line.
Figure 73:Power flow display: Inputs
I01
and
I02
are closed, relay
Q1
has picked up
= Visible area
▶
Press pushbutton actuator S2, that has been connected as the N/C
contact.
The power flow is interrupted and relay Q1 drops out.
PROGRAM...
STOP
å
RUN
PARAMETER
SET CLOCK...
→
The Status display also shows the current mode set.
I12...........
I
P-
MO 14:42
Q1.......
STOP
I01====I02====================
Ä
Q01
L: 1 C:1 RUN