![background image](http://html1.mh-extra.com/html/eaton/easy800/easy800_manual_3950236130.webp)
4 Wiring with 800
4.6 Program transfer from and to the memory card
126
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
4.6.1 Deleting a program on the card
Requirement: You must be in the CARD menu.
▶
Select the DELETE CARD menu.
▶
Confirm the safety prompt DELETE ? with OK if you wish to delete the
card content.
Press ESC to cancel.
▶
After transferring or deleting a program, remove the memory card and
close the cover.
4.6.2 Program exchange between devices with memory card
Upward compatibility on
800 standard devices
The easy800 standard device family allows programs from an older version
to be read in newer device versions without any restrictions in function.
A memory card with a program can always be read by an easy800 standard
device that has a newer operating system (with a higher version number)
than the device from which the memory card was written. The program read
back is executable.
Downward compatibility with
800 standard devices
If a program is written to the memory card by an easy800 standard device
with a newer operating system, this program can also be read and run by an
easy800 standard device with an older operating system. This requires that
the program does not contain any functions that are not supported by the
older operating system.
If the program contains functions that are not supported by the older
operating system, the PROG INVALID! fault message appears with the
CARD -> DEVICE transfer.
The following special point applies to older easy800 standard devices:
Table 16: Compatibility matrix for program exchange between devices
DELETE ?
→
Memory cards that are created with an easy800 standard device
version > 03 cannot be read by devices with version 03
(no upward compatibility).
Write card from device
…
Card read with device…
easy800
standard, V01
easy800
standard, V03/04
easy800
standard, V07
easy800
standard, V10
easy800 standard, V01
OK
–
–
–
easy800 standard, V03/04
OK
OK
–
–
easy800 standard, V07
OK
OK
OK
–
easy800 standard, V10
OK
OK
OK
OK