2 Installation
2.8 Connecting the serial interface
66
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
2.8.4 Inserting the memory card
easy800 standard devices support the use of memory cards that are fitted
into the serial interface. The memory card can be used to store a single
program that can be read from any suitable easy800 standard device.
With easy800 standard only use the EASY-M-256K card.
▶
Remove the cover from the interface and connect the connector memory
card
Working with the memory card
section 4.6, “Program transfer from and
to the memory card”, page 124.
Figure 64:Connecting and removing the memory card
→
With easy800 standard you can also remove or insert the
memory card when the power supply is switched on without
any risk of data loss.