3 Commissioning
3.8 The first circuit diagram
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
81
The wiring arrow works between contacts and relays. When you move the
arrow onto a contact or relay coil, it changes back to the cursor and can be
reactivated if required.
▶
Press ALT to wire the cursor from
I02
through to the coil field.
The cursor changes into a flashing wiring arrow and automatically jumps to
the next logical wiring position.
▶
Press the cursor button
í
. Contact
I02
will be connected up to the coil
field.
▶
Press the cursor button
í
again.
The cursor will move to the coil field.
▶
Press OK.
The specified coil function
Ä
and the output relay
Q01
are correct and do not
have to be changed.
Your result will look as follows:
Figure 71:Your first wired and functional circuit diagram
= Visible area
▶
Press ESC to leave the circuit diagram display.
The SAVE menu appears.
Saving
Figure 72:SAVE menu
= Visible area
▶
Confirm with OK.
The circuit diagram is stored.
▶
Press the ESC pushbutton twice to return to the main menu.
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊlÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
ÊÊÊÊÊÊÊ
-
L: 1 C:1 B:7944
→
The easy800 device automatically connects adjacent contacts
up to the coil.
-I02
l
L: 1 C:3 B:7944
→
You can use DEL to erase a connection at the cursor or arrow
position. Where connections intersect, the vertical connections
are deleted first, then, if you press DEL again, the horizontal
connections are deleted.
--------
Ä
Q01
L: 1 C:15 B:7944
I01----I02--------------------
Ä
Q01
L:1 C:15 B:7944
I01----I02--------------------
Ä
Q01
SAVE
…