DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 95

Page: 95 / 134

Maintenance

Operating Instructions 911-211-10 - 00.0 - 10/2020

6.3

Servicing the pneumatic system

6.3.1 Adjusting the operating pressure

Proper setting

Refer to the

Technical Data

(



p. 119

) chapter for the permissible

operating pressure. The operating pressure cannot deviate by more than
± 0.5 bar.

Check the operating pressure on a daily basis.

Fig. 62: Adjusting the operating pressure

To adjust the operating pressure:

Pull the pressure regulator (1) up.

Turn the pressure regulator until the pressure gage (2) indicates the
proper setting:

• Increase pressure = turn clockwise

• Reduce pressure = turn counterclockwise

Push the pressure regulator (1) down.

NOTICE

Property damage from incorrect adjustment!

Incorrect operating pressure can result in damage to the machine.

Ensure that the machine is only used when the operating pressure
is set correctly.

(1)

- Pressure regulator

(2)

- Pressure gage

①

②

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands